What protocol is used in networking when there is a looping problem between multiple switches on a network define this protocol?


What protocol is used in networking when there is a looping problem between multiple switches on a network define this protocol?

The Spanning-Tree Protocol is used in switched networks to create a loop free network. Bridge ID — The bridge ID is how STP keeps track of all the switches in the network. It is determined by a combination of the bridge priority (32,768 by default on all Cisco switches) and the base MAC address.

You are watching: Which of the following solutions would you implement to eliminate switching loops


*

What protocol is used to avoid loops in switched networks?

Spanning Tree Protocol (STP)IEEE standardized a solution (IEEE 802.1D) to prevent bridging loops in data networks and provide loop-free topologies. This standardized solution is called Spanning Tree Protocol (STP).

How do you stop a switch from looping?

How does STP prevent loops? Because the “best ports” are put into forwarding state and the other ports are put into blocking state, there are no loops in the network. When a new switch is introduced to the network, the algorithm and port states are recalculated to prevent a new loop.

What happens if a loop occurs in a network?

Network loops might cause a slow, irregular Internet connection or network failure. When a network loop overwhelms broadcast traffic and degrades network performance, it is called a “broadcast storm”.

Which protocol is used to eliminate Layer 2 loops?


*

The Spanning Tree Protocol (STP) is a network protocol that is used to eliminate bridge loops in Ethernet LANs.

How do Layer 2 loops occur?

A switching loop occurs in a computer network when there is more than one layer 2 path between two endpoint devices (i.e., there multiple connections between 2 network switches or two ports on the same switch connected together).

Does Bpdu Guard prevent loops?

BPDU Guard: Prevents accidental connection of switching devices to PortFast-enabled ports. Connecting switches to PortFast-enabled ports can cause Layer 2 loops or topology changes. the root switch. Loop Guard: The Loop Guard STP feature improves the stability of Layer 2 networks by preventing bridging loops.

Which is solution would you implement to eliminate switching loops?

Which of the following solutions would you implement to eliminate switching loops? You manage a network that uses a single switch. All ports within your buildings connect through he single switch . Which feature should you implement? You manage a network that uses multiple switches.

When does a switching loop occur in a network?

Redundant / Backup Link (S1, S4, S5, S6) This network will function smoothly only if one link either the primary link or the backup link is active. If both links are active, a switching loop will occur. And, due to the switching loop, this network will not work.

See more: 4 Pics 1 Word 5 Letters Chicks Twins Think Hens, All Levels With Chick Image

What are the effects of a layer 2 switching loop?

In nutshell, a layer 2 switching loop creates three major problems; broadcast storm, duplicate frames, and unstable CAM table. If a loop exists, a single looped frame is sufficient to decrease the performance of the entire network by consuming the bandwidth and CPU power of the affected devices.

How to detect loops created by Unmanaged Switches?

Typically, an unmanaged switch wouldn’t send BPDU’s, since it won’t support spanning-tree. So you can only see your own BPDU’s coming back to you on another port then. If you’re running spanning-tree, you can use a BPDU guard on Cisco to stop the loop by shutting down the interface:

A switching loop occurs in a computer network when there is more than one layer 2 path between two endpoint devices (i.e., there multiple connections between 2 network switches or two ports on the same switch connected together). For more information about switching loops, you should visit https://en.wikipedia.org/wiki/Switching_loop .

Which of the following solutions would you implement to eliminate switching loops? You manage a network that uses a single switch. All ports within your buildings connect through he single switch . Which feature should you implement? You manage a network that uses multiple switches.

In nutshell, a layer 2 switching loop creates three major problems; broadcast storm, duplicate frames, and unstable CAM table. If a loop exists, a single looped frame is sufficient to decrease the performance of the entire network by consuming the bandwidth and CPU power of the affected devices.

How long does it take for a switching loop to disappear?

When there is a switching loop on your network, the destination will be unreachable until the switching loop disappears because to join the next network hop you have to pass by the previous one. This can take several minutes depending on the routing protocol that is used (i.e., OSPF, RIPv2, etc.).